Toshiba KV-DVR DVR User Manual


 
44
4.7.7 Auto Sequencing
The DVR supports an Auto Sequencing setting which allows the video output device to cycle through user specified
camera channels.
NOTE: In order to use the Auto Sequencing feature, an output device must be connected to the DVR unit.
Active Camera – Active Cameras that will be cycled through the Auto Sequencing shown in yellow.
Non Active Camera – Non Active Cameras that will be cycled through the Auto Sequencing shown in red.
Select All – Selects camera all camera divisions.
Custom Mode
Skip 0 FPS Channel – This setting allows the sequencing to skip a channel that contains 0 Frames per second.
Interval (sec) – Interval (sec) sets the amount of time a given channel will be shown on the output device.
Select All – Selects all camera channels in the division.
Individual Select – Selects a specific camera channel.
Divisions Sections – Allows user to select divisions 1, 4, 9, 16, 7, 10, and 13.
1
2
4
5
6
7
9
8
3
2
3
4
5
6
1
7
8
9