Filter
Top Products
32
4.4 Frame Setup
The Frame Setup menu gives the user the option to adjust both the resolution and the number of images per second
each camera will record. When setting up the PPS sliders, the BLUE slider represents the frames in which the DVR will
capture the incoming video while the RED slider represents the frame rate that will be recorded.
This option is beneficial when higher frame rates are desired remotely. The Server will only send out frames remotely
that have first been encoded. For Ex. If the Blue ‘ENCODING’ option is set to 25 PPS and the Red ‘RECORDING’
option is set to 7 PPS then the DVR Server will record 7 PPS and users viewing live video remotely will receive 25 PPS
on that specific camera.
NOTE: The RED FPS record slider cannot exceed the BLUE FPS capture slider.
2
1
6
5
4
7
3
8
9
Figure 4.4