Filter
Top Products
28
TV operation
Press MENU in the TV mode, then press or
to select option.
Press or to select “TV/CABLE”.
1
2
Press MENU repeatedly until the menu screen is
cleared.
4
Press
or
to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
Automatic memory tuning
Press MENU in the TV mode, then press or
to select option.
1
Press or to select “CH PROGRAM”.
2
Press to start “CH PROGRAM”.
The unit will begin memorizing all the channels
available in your area.
3
(Analog tuning)
(Digital tuning)
When channel programming is complete, the
message “COMPLETED” appears.
4
Press CH or to view the programmed
channels.
5
Note:
You cannot select “TV/CABLE” and “CH PROGRAM” features if
you set the channel to “VIDEO1”, “VIDEO2” or “ColorStream”.
5V60101A [E]p23-29 2/22/06, 6:14 PM28