Filter
Top Products
38
TV operation
Stereo and Second Audio Program (SAP)
The unit is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you
programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or
SAP which broadcasters can use to transmit a second language for bilingual
transmission or for other purposes.
To select desired sound
Listening to stereo sound
Press AUDIO SELECT to select the desired sound.
When the TV is turned on or a channel selection is
made, the “STEREO” will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT
to change to mono sound. The noise should be
eliminated. Press it again to return to the stereo sound.
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, “SAP” will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
Broadcast SAP setting Audio display
MONO OFF MONO
ON MONO
STEREO OFF STEREO MONO
ON STEREO MONO
MONO+SAP OFF MONO
ON SAP
STEREO+SAP OFF STEREO MONO
ON SAP
/ / /
MENU
AUDIO SELECT
Setting the SAP (analog mode)
1
Press MENU in the analog mode, then press
or to select option.
Press
or to select “SAP”, then press or
to select ON or OFF.
2
Press MENU repeatedly until the menu screen
is cleared.
3
5V60101A [E]p30-39 2/22/06, 1:05 PM38