Filter
Top Products
39
TV operation
Setting the digital setup (digital mode)
Selecting the audio language Selecting the digital output format
When two or more audio languages are included in a
digital signal, you can select one of the audio languages.
Press MENU in the digital mode, then press
or to select option.
1
Press or to select “DIGITAL SETUP”, then
press
.
2
Press or to select “AUDIO LANGUAGE”,
then press
.
3
Press / or Number buttons (0-7) to select
desired language, then press ENTER.
4
Press MENU repeatedly until the menu screen
is cleared.
5
Use this feature to select the digital audio output format
when you connect a Dolby Digital decoder or other digital
audio system to the coaxial digital audio output on the TV.
Follow the left steps 1-2.
1
Press or to select “DIGITAL OUTPUT”,
then press
or to select PCM or DOLBY
DIGITAL.
2
Press MENU repeatedly until the menu screen
is cleared.
3
Checking the digital signal strength
You can check the strength of the digital signal by viewing
the digital signal meter.
Follow the left steps 1-2.
1
Press or to select “SIGNAL METER”, then
press
to check the digital signal strength.
2
Press MENU repeatedly until the menu screen
is cleared.
3
/ / /
MENU
0–7
ENTER
Notes:
• Signal meter feature is not available for analog channels.
• After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-operation automatically.
• When you select a vacant channel, the signal meter may
react.
5V60101A [E]p30-39 2/22/06, 1:05 PM39