Toshiba MW27H62 DVD VCR Combo User Manual


 
34
TV operation
4
Press or to select the desired picture
mode, then press ENTER.
3
After your desired setting press MENU
repeatedly until the menu screen is cleared.
1
Press MENU, then press or to select
option, then press .
After your desired setting press MENU
repeatedly until the menu screen is cleared.
3
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
Picture control adjustment/
Adjusting the picture preference
Picture controls are factory preset but you can adjust them individually as
follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Press or to select the item you want to
adjust, then press
or to adjust the setting.
2
33
33
3 To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
Picture control adjustment Adjusting the picture preference
Press or to select “MODE”, then press
.
1
2
Press MENU, then press or to select
option.
Mode Picture quality
SPORTS Bright and dynamic picture (factory-set)
STANDARD Standard picture quality (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you;
see “Picture control adjustment” on left)
/ / /
MENU
ENTER
CANCEL
Selection Pressing
BRIGHTNESS darker lighter
CONTRAST lower higher
COLOR paler deeper
TINT reddish greenish
SHARPNESS softer sharper
5V60101A [E]p30-39 2/22/06, 1:05 PM34