Toshiba 51H93 Projection Television User Manual


 
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
52
Chapter 6: Setting up your TV
To check the system status:
1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set
of INSTALLATION menu icons will appear on-screen, as
shown in step 3).
Setup
Installation
Sleep Timer
On/Off Timer
Digital Tuner Hold
Off
Slide Show Interval
2 Sec
Convergence
3. Open the SYSTEM STATUS menu, highlight SYSTEM
INFORMATION, and then press ENTER.
System Status
System Information
4. Use the x buttons to scroll through the menu bar to
check the product information and software version.
OK
System Information
Product Information
Brand: Toshiba
Model: 57H93
IEEE-1394 GUID: 0000391428343803
OK
System Information
Software Version
1.0.7
Jul 21 2003 - 16:31:05
FW 2.1
To close the screen and return to the TERRESTRIAL menu:
Highlight OK and press ENTER.
To return to normal viewing:
Press EXIT.
Checking system status Viewing the digital signal meter
You can view the digital signal meter for ANT 1 and ANT 2
digital TV input sources only.
To view the digital signal meter:
1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set
of INSTALLATION menu icons will appear on-screen, as
shown in step 3 below.)
Setup
Installation
Sleep Timer
On/Off Timer
Digital Tuner Hold
Off
Slide Show Interval
2 Sec
Convergence
3. Open the TERRESTRIAL menu, highlight SIGNAL
METER, and press ENTER.
Terrestrial
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
4. Use the yzx buttons to select the antenna input and
digital channel whose signal you want to check.
Note: The digital channel number listed in the Signal Meter
screen does not correspond to an actual TV channel number.
Contact your local broadcasters to obtain the RF channel
numbers for your local digital stations.
Signal Unlocked
OK
0 Peak 0
Signal Meter
Antenna
Channel (Digital)
1
1
Signal Unlocked
OK
0 Peak 0
Signal Meter
Antenna
Channel (Digital)
1
134
To close the screen and return to the TERRESTRIAL menu:
Highlight OK and press ENTER.
To return to normal viewing:
Press EXIT.