Filter
Top Products
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
63
Tuning to the next programmed channel
Note: This feature will not work unless you program channels
into the TV’s channel memory (see page 42).
To tune to the next programmed channel:
Press CHANNEL y or z on the remote control or TV
front panel.
Using SpeedSurf to change to a
specific programmed channel
Note: This feature will not work unless you program channels
into the TV’s channel memory (see page 42).
1. Press and hold CHANNEL y or z for a few seconds. The
TV will enter SpeedSurf mode.
4 CNN
7CBS
11 FOX
13 ESPN
16 TBS
2. Repeatedly press or hold CHANNEL y or z while the
SpeedSurf mode is on-screen to scroll through the channel
list. Release the button to display the highlighted channel.
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number buttons (0–9) on the remote
control.
For example, to select channel 125, press 1, 2, 5.
Tuning digital channels:
Press the Channel Number buttons (0–9) on the remote
control, followed by the – (dash) button and then the
sub-channel number.
For example, to select digital channel 125-1,
press 1, 2, 5, –, 1.
Tuning channels
Upper channels
↑
Current channel (highlighted)
↓
Lower channels
Channel label
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1. Select the first channel (or video mode) you want to view.
2. Select a second channel using the Channel Number buttons
(and the dash (–) button if selecting a digital channel).
3. Press CH RTN on the remote control. The previous
channel will display.
Each time you press CH RTN, the TV will switch back and
forth between the last two channels that were selected.
Chapter 8: Using the TV’s features
+
PAGE –
ACTION
ENTER
MENU
THEATER
NET
F
A
V
–
100
+10
CH RTN
Channel Numbers
CHANNEL y / z
TouchFocus
TV/VIDEO
EXITMENU
CHANNELVOLUME
TV front panel
CHANNEL z CHANNEL y
—
(dash)