Filter
Top Products
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
66
Using the auto aspect ratio feature
(480i signals only)
When the AUTO ASPECT feature is set to ON and the TV
receives a 480i signal, the picture size is automatically selected,
as described in the following table.
Note:
• The AUTO ASPECT feature applies to 480i signals received from the
VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream HD1/HD2 input sources
only, and is not applicable to antenna, Cable, or DVI input sources.
• The AUTO ASPECT feature is not available when the POP
double-window is open.
To turn on the AUTO ASPECT feature:
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the AUTO ASPECT RATIO field, select ON.
4. To save your settings temporarily, highlight DONE and
press ENTER.
To save your settings permanently, highlight SAVE and
press ENTER.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Display Format
Auto Aspect Ratio
Save Done Reset
Natural
0
Video
1080i
On
To turn off the AUTO ASPECT feature:
Select OFF in step 3 above.
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the PICTURE SIZE field, make sure either Theater
Wide 2 or Theater Wide 3 is selected (you cannot scroll in
any other mode).
4. Press z to highlight the PICTURE SCROLL field.
5. Pressx or • to scroll the picture as needed, from –10 to
+20.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Display Format
Auto Aspect Ratio
Save Done Reset
Theater Wide 2
0
Video
1080i
On
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Display Format
Auto Aspect Ratio
Save Done Reset
Theater Wide 2
-10
Video
1080i
On
6. To save your scroll settings temporarily, highlight DONE
and press ENTER.
To save your scroll settings permanently, highlight SAVE
and press ENTER.
Chapter 8: Using the TV’s features
Scrolling the Theater Wide picture
(Theater Wide 2 and 3 only)
Automatic aspect size
Aspect ratio
(automatically selected
of signal source
when AUTO ASPECT is ON)
4:3 Theater Wide 2
16:9 Full
Not defined User-selected picture size
(no ID-1 data) (see pages 64–65)