Filter
Top Products
(E) 51/57/65H93
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
50
Chapter 6: Setting up your TV
Adjusting the color convergence
(continued)
Setting the AVHD device skip time
When you connect an external AVHD device, such as the
Toshiba Symbio
™
160HD4 AVHD (audio/video hard drive) to
one of the TV’s IEEE-1394 ports, you can use this feature to set
the number of minutes the device will skip forward or backward
when you press the SKIP buttons.
Note:
•This TV will work best with the Toshiba Symbio™ 160HD4 AVHD,
for recording high definition and standard definition material from
either tuner and for controlling live TV (pause/rewind/fast
forward/skip). When the AVHD is connected to the TV, the
remote control keys (STOP, REW, PAUSE, PLAY, FF) are
automatically activated to allow pausing of live TV.
•When you connect an AVHD (or a D-VHS) device, the
TV Guide On Screen system is automatically configured
to allow recording.
See page 23 for device connection information.
See Chapters 5 and 7 for details about setting up
and using the TV Guide On Screen system.
To set the AVHD device skip time:
1. Press MENU and open the
SETUP menu.
2. Highlight AVHD SKIP
TIME and press ENTER.
3. Press z or y to select the
AVHD skip time and press
ENTER.
7. If both red and blue need adjusting, you will need to
perfrom steps 5 and 6 twice.
8. Press ENTER to display the cursor.
9. Repeat steps 4 to 8 to adjust another position.
10. Press EXIT to close the Convergence menu.
To reset your convergence adjustments:
1. Press MENU and open the SETUP menu.
2. Highlight CONVERGENCE and press ENTER.
3. Press RECALL.
The message, “WARNING: RESETS USER
ADJUSTMENT TO FACTORY SETTINGS” appears.
4. Press ENTER to reset your convergence adjustments to the
factory settings.
Selecting the HDMI
™
1 or HDMI 2
audio mode
To select the HDMI audio mode:
1. Press MENU and open the SET UP menu.
2. Highlight HDMI AUDIO
SELECTION and press
ENTER.
3. Press z or y to select
which HDMI device for
which you want to select
audio and press ENTER.
4. Press z or y to select the
HDMI audio mode from Auto, Digital, or Analog (Auto is
recommended). See “Connecting an HDMI or a DVI
device to the HDMI input on page 19.
Setup
Sleep Timer
Convergence
Navigate Select Back Exit
DVD RTN
CH RTN
EXIT
On/Off Timer
AVHD Skip Time
15 min
1 min
3 min
5 min
15 min
Installation
HDMI Audio Selection
Side Show Interval
2 Sec
51,57HX94(E)044-52 9/12/04, 7:11 PM50