Filter
Top Products
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
94
Chapter 10: Troubleshooting
SETUP
1. Q: What if I move and my ZIP code or postal code
changes?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
information (see Chapter 3 for details). It can take up to
24 hours to receive new data.
2. Q: What if I change my cable hook-up to antenna or vice
versa?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
3. Q: What if I change cable boxes?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
4. Q: I used to have a cable box, but now I get direct cable.
What do I do?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
5. Q: If I add a recorder or change my cable service, how do I
change my Setup information?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
information (see Chapter 3 for details). It can take up to
24 hours to receive new data.
6. Q: Why does it take up to 24 hours for the TV Guide
On Screen system to be ready for use?
A: The initial setup process consists of finding the stations in
your area that carry the TV Guide On Screen system data
and tuning to those stations to receive the setup and
listings data.
LED indications
The green and red LED lights are on the TV front panel, to the right of the POWER button.
{
LEDs
LED Indication Description
Green blinks 3 times (after the Wait about 30 seconds until the Green LED lights continuously, and then press POWER to turn ON the TV.
power cord is plugged in).
Green lights solid. Indicates that the TV power cord is plugged in and the power is OFF. This is called “standby mode.”
Red lights solid. Indicates that the TV power cord is plugged in and the power is ON.
Red blinks. Press POWER to turn OFF the TV, and unplug the power cord. Plug in the power cord again and press POWER to
turn ON the TV. If the problem persists, turn OFF the TV, unplug it, and contact a Toshiba Authorized Service Center.
Green blinks at 3-second intervals. The fan for cooling the CableCARD has stopped. Press POWER to turn OFF the TV , unplug the power cord,
and contact a Toshiba Authorized Service Center.
TV Guide On Screen
®
FAQs
The following are frequently asked questions about the TV Guide On Screen system. The answers represent the most likely solutions to the
problem.
51,57HX94(E)092-97 9/12/04, 10:10 PM94