Filter
Top Products
16
> Settings > LNB
Now edit the menu > Settings > LNB until the
indications of this menu correspond the indica-
tions of your receiver. Set no satellite for the
switch criteria not required.
Additional Settings
Having set the matrix-switch of your DVB-receiver
of your receiver system, you must now test and if
necessary correct the additional settings of your
receiver system.
To do this, mark in the line Check LNB proceed
for the satellite you want to test.
Confirm with OK.
The menu >LNB>Check now appears with indi-
cation of the DiSEqC-setting selected (e.g. A/B).
LNB-setting
LOF low band:
LOF (local oscillator frequency) is the frequency at
which an LNB transforms the frequency received
to the so-called 1st intermediate frequency which
can then be received by the receiver. LNBs work
with 2 LOFs in order to be able to transform the
total reception range from 10.7 to 11.8 GHz (low-
band) and 11.7 to 12.75 GHz (high band). Enter
your LNB low-band LOF-frequency in this line by
means of the numeric keys.
( Is usually indicated on the LNB )
LOF high band
Enter your LNB high-band LOF frequency in this
line by means of the numeric keys.
Switching LOF low/high:
Enter in this line by means of the numeric keys
the frequency at which your LNB switches from
low-band to high-band.
SETTINGS