Filter
Top Products
33
OPERATION
survey of the program of today on the different
channels too. Press ”green” to recall this survey.
Booking by means of EPG
In all EPG menu’s, you can book any program
shown just by means of moving the cursor to the
program and pressing ”OK”. If the program is cur-
rently transmitted the receiver will immediately
tune to the program. If the program is transmitted
at a later time, the program is being ”booked”, i.e.
the receiver will automatically tune to the program
once the transmission starts.
Timer by means of EPG
Your receiver is equipped with as well the ”pro-
gram booking function” as described above, as a
Timer function if for example you want to record
the transmission on a video tape. The difference
between those two functions is whether you actu-
ally want to see the program or you want it re-
corded.
You can mark any program just by means of
moving the cursor to the program and pressing
”red-button”. If the program is currently transmit-
ted the receiver will immediately tune to the pro-
gram. If the program is transmitted at a later time,
the program is being marked, i.e. the receiver will
automatically tune to the program once the trans-
mission starts. A receiver in “record-mode” can
be stopped by pressing the standby-button.
Operation
The Timer function is selected via the button ”yel-
low” New Timer. In the timer menu you enter in
the first line the date and the start and stop time.
If it is a one-time recording or something you
want repeeded is entered in the first line too.
In the second line ( status ) you enter whether you
actually want to see the program Noted down
(Booking) , or you want the program recorded on
video tape (VCR). You also program whether it
concerns a TV or a radio program.
In the lower line the desired program is entered.
By pressing the OK-button the channel list ap-
pears.
Select the program and confirm with OK