Filter
Top Products
19
SETTINGS
Search > Satellite
Under this menu item you can make a search for
a special satellite. In that case all other satellites
are not being searched.
Select the menu line satellite by marking it by
means of the cursor-button.
Confirm with OK.
Start search appears on the screen.
However, first you have to select the satellite
which you want to search. For this purpose, press
the button OK.
A menu window with the four satellite positions
now appears.
Mark up the satellite wanted by means of the cur-
sor-button.
Press the button OK to start the search.
By pressing the button OK you can exit from the
function. The search may last for more than 15
minutes. Please also note the screen insertions.
Search > Transponder
Under this menu item you can search a trans-
ponder (see Technical Terms) of programs. To do
this, it is necessary to enter the transponder data.
Select the menu line Transponder by marking it
by means of the cursor-button.
Confirm with OK.
The menu > search > transponder appears.
Satellite
Select in this line the satellite of the transponder
wanted.
Mark up the line by means of the cursor buttons.
Confirm with OK.
Transponder frequency:
Enter the frequency wanted in this line by means
of the numeric keys.
Polarisation:
Enter in this line by means of the OK-button the
polarisation level (horisontal or vertical), at which
the program wanted is transmitted.