Triax DVB 65S DVR User Manual


 
25
SETTINGS
Locking of programs
If you wish so, you can lock programs. A locked
program will not be displayed on the screen, until
after setting the program you have entered your
personal PIN-number. Once this number has been
entered, the lock will remain cancelled until the
receiver is switched off again (Standby)
To lock a program, proceed as follows:
Call up the main menu by pressing the menu-
button. By means of the cursor-button mark up
the line tv-programs to lock tv-programs, or ra-
dio programs to lock radio programs.
Confirm with OK.
Now the sub-menu > Programs appears.
Markup the line lock by means of the cursor-but-
ton.
Confirm with OK.
Now the user’s program list appears.
Mark up by means of the cursor-button the pro-
gram you want to lock.
Confirm with OK.
The program is now provided with a red cross.
Repeat this procedure, until you have locked the
programs wanted.
By pressing the menu-button you go back to
normal mode.
To activate the parental lock you must enter your
personal PIN-number in the following sub-menu
Change PIN and then as described on page 13
(Parental lock) activate the parental lock.
EPG
The programs to be a part of the EPG function
(max. 30) are to be marked. They are marked in
the very same way as in the operation described
above.
Hereafter program information from exactly those
programs is shown when activating the “i-button”,
if these information’s are transmitted by the pro-
vider.