Filter
Top Products
28
OPERATION
Power ON/OFF
Switch on the receiver by pressing the ON/OFF
button of the receiver or remote control.
When you again press the ON/OFF button of the
receiver or remote control, the receiver is
switched off.
The receiver is now in standby mode, and the dis-
play shows the time.
To completely disconnect the receiver from the
mains press the mains switch on the back of the
receiver. Switch on the receiver, press the mains
switch again.
Program selection
By means of the program up/down-buttons.
You can step up or down the programs by one
program place by means of the program buttons
up/down of the receiver or remote control.
By means of the numeric keys
Enter the wanted program number by means of
the numeric keys.
E.g.
1for program place 1
1, subsequently 4 for program place 14
2, subsequently 3, subsequently 4 for program
place 234
When entering multi-digit program numbers you
have approx. 3 seconds time after having activat-
ed a button to complete your entering.
If you only want to enter a one-digit or two-digit
number, you can expedite the switch-over proc-
ess by pressing the button OK after entering the
digits.