Filter
Top Products
21 22
SimpleSound
TM
Setup & Other
‘Punch Throughs’
ADVANCED SETUP
ADVANCED SETUP
SimpleSound
TM
Setup & Other
‘Punch Throughs’
SimpleSound
TM
Setup & Other ‘Punch Throughs’
STEP 1:
In a basic home entertainment
system, the sound may come
from your TV. In a more
advanced system, the sound may
come from your audio
Component such as a Surround
Sound Receiver or Home Theatre
system. So, first, you need to
identify which Component you
want to use in your system for
sound.
STEP 1:
In a basic home entertainment
system, the sound may come
from your TV. In a more
advanced system, the sound may
come from your audio
Component such as a Surround
Sound Receiver or Home Theatre
system. So, first, you need to
identify which Component you
want to use in your system for
sound.
STEP 2:
Press and hold both the
COMPONENT button you want to
add volume control to, such as
DVD or VCR, and the SEL
(Select) button for approximately
3 seconds, until the word “SET”
is displayed on the LCD screen.
This signals that you are now in
SimpleSound Setup mode.
STEP 3:
Press the VOL+ button. The
screen will alternately blink
PUNCH and FROM in the display.
Now, let’s setup SimpleSound
TM
. Here’s how:
STEP 4:
Now, press the COMPONENT
button for the component that
has the Volume control you
want (i.e., TV for systems using
the TV speakers, AUDIO for
systems using Surround Sound
receivers). The screen display
will flash “SAVED” twice to
confirm the command is saved,
and the RF10 will automatically
return to normal operating
mode. This sets up a group of
three buttons (Volume Up,
Volume Down, and MUTE) in
one action!
• VOL - Volume Up, Volume Down and
Mute
•CH- Channel Up, Channel Down,
Previous Ch and Channel (0-9)
buttons.
• PLAY - Play, Stop, Pause, Rewind
and Fast Forward
• VOD - Menu, Guide, Info, Exit, Up,
Down,Left, Right, Select
Simply perform the steps above and
for step 3, press the first button listed in
the group and all buttons will be
programmed.
STEP 5:
Repeat STEPS 2-4 until all your
other components (VCR, CABLE,
CD, etc.) operate the volume
perfectly.
SimpleSound
TM
is a dynamic feature that gives you total
volume control over all the Components in your system,
even those without their own built-in volume control,
such as TiVo, DVD and VCR... saving you the hassle and
inconvenience of constantly needing to switch between
Component modes on the remote. With SimpleSound
TM
,
you can set the RF10’s volume control buttons to always
control the sound in your system, even when you’re in
VCR or DVD mode, without switching back to AUDIO or
TV. Even more exciting, SimpleSound¢‚ is what is called
a ‘Punch Through’ feature and is not limited strictly to
volume control. Click and enjoy!
IMPORTANT: You now have 30 seconds to per-
form the next step while you are in Setup mode.
If you don’t press a button within 30 seconds,
“SET” will disappear from the screen, signaling
that you have exited Setup mode and you will
need to start over.
NOTE: The Punch Through feature is not limited
to volume and can also be applied to other
groups of buttons and functions. If you find
yourself switching to a particular component
frequently to use a group of controls, consider
using Punch Through for another group, as
listed here: