Filter
Top Products
33 34
Hiding & Adding Pages
Pages CUSTOMIZING
Hiding & Adding Pages
CUSTOMIZING
Hiding and Adding Pages
Each of your RF30 Components actually contains five
pages. However, only four pages are visible in the factory
default setting. One page is hidden in each Component.
If you wish to use the hidden page, you can ADD it. If you
don’t want to use some of the existing pages, you can HIDE
them. You can add or hide pages on Components OR on
your favorite channel pages using this simple process:
NOTE: Be sure to program your Macros before you hide pages with
potential macros in them. You can’t access hidden pages during
macro setup. However, after you finish Macro setup, you can hide
pages without affecting operation of your macros.
STEP 1:
Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3 sec-
onds, until the word ”SETUP” is
displayed at the top of the LCD
touch screen. This signals that
you are now in setup mode.
STEP 2:
Press the EDIT button on the
LCD screen.
STEP 3:
Press the PAGE button once the
screen changes to EDIT mode.
STEP 4:
“PAGE” appears at the top of the
screen. Now, you can navigate to
any page, using the MAIN,
COMPONENT, FAV, and PAGE
buttons.
STEP 5:
When you select a page, the top
of the screen indicates whether
you want to “ADD?” or “HIDE”
the page displayed. When you
want to change a page’s visibility
(i.e., either ADD or HIDE),
simply press the LIGHT button.
STEP 6:
You can continue to ADD or
HIDE pages on other devices
by repeating Steps 4 and 5.
STEP 7:
When you are finished adding
and hiding pages, press the
MAIN button four times to return
to normal operation.
IMPORTANT:You now have 30 seconds
to perform the next step while you are
in SETUP mode. If you don’t press a
button within 30 seconds, SETUP will
disappear from the screen, signaling
that you have exited setup mode and
you will need to start over.
EDIT
BUTTON
PAGE
BUTTON
PAGE
BUTTONS
COMPONENT
BUTTON
FAV
BUTTON
MAIN
BUTTON
This page is hidden.To ADD
it, press the LIGHT button
This page is visible.To HIDE
it, press the LIGHT button.