Vidikron Vision 140 Projection Television User Manual


 
Controls and Functions
10 Vision Model 140/150 Installation/Operation Manual
PRE
L
IMINAR
Y
2.4
VHD Controller Front
Panel
Figure 2-4 shows the controls and indicators on the VHD Controller front panel; the
paragraphs that follow describe them.
Figure 2-4. VHD Controller Front Panel
1. POWER BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to standby
mode. For a discrete on or off command, you can use the direct access buttons on the
remote control.
2. IR SENSOR
Receives IR commands from the remote.
3. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu
or – if no menu is selected – the current source, signal format (NTSC or PAL), input
resolution and aspect ratio.
Component SD NTSC 480i
16:9 V150
1 2 3