Filter
Top Products
15
1. Hold down the Menu key for 2 seconds or more.
The main menu screen is displayed.
2. Move the cursor with the [ ] and [ ] keys to select "MAINTENANCE," then press the Menu key.
The Equipment Maintenance screen is displayed.
3. Select "HD INITIALIZE," then press the Menu key.
The Hard Disk Initialization screen is displayed.
4. Select the disk mode using the [+] and [
-
] keys.
Select "NORMAL," or "MIRROR."
5. Move the cursor with the [ ] and [ ] keys to select "EXECUTE," then press the Menu key.
"YES" and "CANCEL" are displayed.
6. Move the cursor with the [ ] and [ ] keys to select "YES," then press the Menu key.
Confirmation message is displayed after executing the hard disk initialization.
7. Select "OK," then press the Menu key.
The display returns to the hard disk initialization screen.
7.3. Hard Disk Initialization
Set disk mode (normal mode and mirror mode) used for recording to the hard disk to initialize the hard disk.
Notes
• Since initializing the hard disk erases all recorded images, be sure to copy the necessary data to DVD-R
disk or USB memory before initialization.
• Disk mode is factory-preset to "NORMAL." Leave the disk mode as it is when using the Digital Video
Recorder in normal mode. However, it is recommended that the hard disk be initialized since recording
starts automatically when the Digital Video Recorder's power is switched on.
Menu key
MAINTENANCE
HD INITIALIZE
SETTING INITIALIZE EXECUTE
LOG INITIALIZE EXECUTE
SET DATA ARCHIVING EXECUTE
SET DATA READING EXECUTE
USB KEY REGISTRATION EXECUTE
USB KEY DATA ERASURE EXECUTE
DISK ARRAY1 UNUSED
DISK ARRAY2 UNUSED
HD INITIALIZE
DISK MODE NORMAL
EXECUTE EXECUTE
HDD–A MASTER 160GB SLAVE
-----
HDD–B MASTER 160GB SLAVE DVD
5. Move the cursor with the [ ] and [ ] keys, select "YES," then press the Menu key.
The message requesting a reboot is displayed.
Note
There is no need to reboot the DVR if not synchronizing using the NTP server, though the message
requesting a reboot is displayed after the clock setting has been saved. (The changed setting is reflected in
the device without rebooting the DVR.)
6. Move the cursor with the [ ] and [ ] keys to select "NO," then press the Menu key.
The display reverts to the main menu screen.