Filter
Top Products
24
12. ARCHIVE
The Digital Video Recorder is equipped with an archive function that transfers image data recorded on the
hard disk to DVD-R disk (available only to models with DVD drives) or USB memory. Camera image data
designated between start position and end position can be archived. Since dedicated viewer software is also
downloaded at the same time, archived images can be easily played back on a PC.
Note
Archive operation can be performed only at the operation level 1. When the security has been set, perform
archive operation after login to the Operation Level 1.
12.1. Archiving by Entering the Date and Time
Use this method for archiving when the date and time are known. Insert the DVD to be archived into the
Digital Video Recorder or connect the USB flash memory to the Digital Video Recorder;
EXECUTE?
USB DVD CANCEL
USB: Archive to the USB memory
DVD: Archive to the DVD-R
Cancel: Reverts to the previous cursor
position without executing.
IMAGE ARCHIVING
START POS1 FEB/07/05 12:01:00
END POS1 FEB/07/05 13:02:00
START POS2 FEB/07/05 12:03:00
END POS2 FEB/07/05 13:04:00
START POS3 FEB/07/05 12:05:00
END POS3 FEB/07/05 13:06:00
START POS4 FEB/07/05 12:07:00
END POS4 FEB/07/05 13:08:00
START POS5 FEB/07/05 12:09:00
END POS5 FEB/07/05 13:10:00
CAMERA CAMERA3
TRANSFER EXECUTE
REC START FEB/01/05 8:00:00
REC END FEB/20/05 17:3
0:00
F
E
B
/
0
7
/
0 5
1
2
:
0
1
:
0
0
1. Hold down the Menu key for 2 seconds or more.
Menu screen is displayed.
2. Move the cursor with the [ ] and [ ] keys, select
"IMAGE ARCHIVING," and press the Menu key.
Image archive screen is displayed.
3. Using the [+] and [
-
] keys, enter the time and date for Start
1 and End 1.
4. To continue to archive other data, repeat Step 3.
Up to 5 start and end "dates and times" can be set.
Note
A separate folder is created at the destination to be
archived each time archiving starts and ends. Perform
archiving by shifting time even when archiving for
consecutive time. Dividing folders results in fewer files in
each folder, thereby making search and display faster.
5. Move the cursor with the [ ] and [ ]keys and
perform camera setting using the [+] and [
-
] keys.
Select the camera to be archived from "CAMERA 1
-
9" and
"ALL."
(
For 16 channels, up to camera 16 can be selected.
)
6. Move the cursor using the [ ] and [ ] keys, select
"EXECUTE," and then press the Menu key.
A message box for selection of either USB or DVD is
displayed at the upper right of the screen. (model with DVD
drive only)
For the model without DVD drive, Selection message "Yes"
or "Cancel" is displayed.
7. Move the cursor using the [ ] and [ ] keys, select
"USB" or "DVD," and then press the Menu key.
For the model without DVD drive, select "YES," then press
the Menu key.