Filter
Top Products
VIZIO M261VP User Manual
40
www.VIZIO.com
Advanced Audio
To select the options in the Advanced Audio sub-menu, press ►. A new menu will be displayed showing
the advanced functions available for fine tuning of the audio.
SRS TruSurround HD™
When watching TV or a movie, TruSurround HD™ creates an
immersive surround sound experience from only two speakers and
provides rich bass, clear dialog and high frequency detail.
You may choose to have this feature On or Off.
Note: When SRS TruSurround HD™ is On, Equalizer adjustments
are not available.
SRS TruVolume
When the programming switches to a commercial or when
changing from channel to channel, volume fluctuations occur.
When turned On, SRS TruVolume
TM
provides the listener with a
comfortable and consistent volume level. VIZIO recommends
turning SRS TruVolume
TM
off when listening to music content.
Digital Audio Out
This option allows selection of the type of processing for the
SPDIF (Optical connector) when used with a home theater system.
Select to choose from Dolby Digital, PCM, or Off.
Analog Audio Out
This option sets the volume control properties when using the RCA (white and red) connectors as
audio line out to connect a Receiver/Amplifier/Home Theater system. Choose from Fixed or
Variable. When set to Variable, volume from the external speakers will change according to the
volume setting on the TV. If it is set to Fixed, the volume can only be changed by the settings on
the external stereo system.
Equalizer Settings
1. To select the options in the Equalizer
Settings sub-menu, press OK. A new
menu will be displayed showing the
available equalizer functions. Press ◄ or
► to select Basic or Advanced.
EQ Mode (Basic)
Adjust Bass and Treble.
EQ Mode (Advanced)
Adjust boost or attenuation of different
frequencies.
Starting from lowest to the highest,
they are 100 Hz, 300Hz, 1 kHz, 3 kHz
and 10 kHz.
2. Press ▼ then◄ or ► to select the
frequency to be adjusted. Press OK.
3. Press ▲ or ▼ to adjust the selected
frequency to your preference. Values
above 0 will boost the frequency and
values below 0 will attenuate the frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off.