Vizio VBR333 Blu-ray Player User Manual


  Open as PDF
of 46
 
24
4
VBR333
Adjusting the Digital Audio Output
This setting changes the type of digital audio data the player outputs over HDMI,
Optical/SPDIF, or Coaxial ports.
1. From the Audio menu, use the Up/
Down Arrow buttons on the remote
to highlight Digital Output and press
SELECT.
The Digital Output menu is displayed.
2. Highlight the digital audio format best
suited to your home audio receiver and
press SELECT:
• PCM-Usethissettingifyoudonothaveareceiverconnectedtothe
player,orifyouhavean“old-fashioned”stereoreceiverconnectedto
theplayerusingthestereoanalog(LandR)ports.
• Bitstream HD-UsethissettingifyouhaveanHDMI-connected
recievercapableofdecodingDTS-HDMasterAudioandDolbyTrueHD
digitalaudio.Thisisthebestqualitydigitalaudiosetting.Whenusing
thissetting,youcanonlylistentotheprimaryaudiotrackonadisc
(thisisusuallythemovie’ssoundtrack).
• Bitstream Legacy -UsethissettingifyouhaveanOptical/SPDIF-
connectedreceivercapableofdecodingDTS,DolbyDigital,orDolby
DigitalPlusaudio.
• Bitstream Mixed-UsethissettingifyouhaveanOptical/SPDIF-or
HDMI-connectedreceivercapableofdecodingDTS,DolbyDigital,
orDolbyDigitalPlusaudioandyouwouldliketobeabletohear
secondaryaudiotracksonyourdiscs(directors’commentaries,etc).
Activating or Deactivating Dynamic Range Control
When activated, this setting normalizes the volume of a disc’s audio track. The
loudest parts of the soundtrack will be quieter, and the quietest parts will be
louder. This effect can be useful when viewing movies late at night, when others
might be sleeping.
To use this setting, your player’s audio must be connected with
HDMI or Optical/SPDIF, and digital output must be set to Bitstream
Mixed or PCM.
To activate or deactivate Dynamic Range Control:
1. From the Audio menu, use the Up/
Down Arrow buttons on the remote to
highlight Dynamic Range Control and
press SELECT.
The Dynamic Range Control menu is
displayed.
2. Use the Arrow buttons on the remote
to highlight On, Off, or Auto and press
SELECT.
Selecting Auto for this setting turns on Dynamic Range Control for
all Blu-ray soundtracks except Dolby TruHD.
 previous next