Filter
Top Products
Connecting Your Devices to the TV
4
16
Connecting Your Devices
Once you have determined the best available connection type on both your device and the TV,
ensure you have the corresponding cable.
For the port locations on your TV, see
Chapter 2: Controls and Connections on page 4
.
To connect a device to the TV:
1. Ensure both the TV and your device are off.
2. Connect the device and the TV. Use the best available connection. See
Choosing the
Correct Connection on page 15
and the
Device Connection Chart
at right.
Ensure each end of the cable is securely connected.
3. Turn the TV on by pressing the Power/Standby button on the remote.
4. Turn your device on.
5. When you are ready to use your newly connected device, press the INPUT button on the
remote and select the connection type (HDMI, RGB, etc) from the on-screen menu. Press
OK.
6. Check the list of devices/connection types below for special instructions:
Cable TV (without cable box/directly from wall)
Perform a channel scan. See Performing a Channel Scan.
RGB
Make sure the desktop resolution on the PC is set to 1920 x 1080. Set the Screen Mode to
Normal. See
Changing the Screen Aspect Ratio on page 20.
DVD Player with DVI
Connect left (white) and right (red) audio cables to the L and R ports next to the HDMI ports
on the TV.