Filter
Top Products
Using the On-Screen Menu
5
37
Using Picture-In-Picture (PIP) / Picture-Outside-Picture (POP)
Your TV features PIP and POP modes. These features allow you to watch two input sources at the
same time. When using PIP, the main input is displayed on the full screen, and the secondary is
displayed in a smaller window. When using POP, the two inputs are displayed side by side.
PIP is only available when the Rating Enable option in the Parental Controls menu is set to Off. See
Enabling or Disabling Program Ratings on page 34
.
To enable or disable PIP/POP:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the PIP icon and press OK. The PIP
Controls menu is displayed.
3. Highlight PIP Mode and press OK. The PIP Controls menu is displayed.
4. Highlight Off, PIP, or POP. Press OK.
5. If PIP is the PIP Mode selected, use the Arrow buttons to adjust each of the PIP settings:
Position - The location of the PIP window. Select Top Right, Bottom Right, Top Left, or
Top Right.
Size - The size of the PIP window. Select Small, Medium, or Large.
Audio - The input for which the TV outputs sound. Select Main or PIP.
6. Press the EXIT button on the remote.
Choosing Inputs for the Main and Secondary Windows
Not all inputs can be displayed using PIP/POP. Use the table below to determine which inputs can
be displayed using PIP/POP. (A “3“ between two inputs denotes compatibility.)
TV Composite AV Component HDMI RGB
TV
3 3 3
Composite AV
3 3 3
Component
3 3 3
HDMI
3 3 3 3
RGB
3 3 3