Filter
Top Products
11
3.5.2 Connect the Satellite Interface to Primary Dish Network or ExpressVU HD Receiver
Using the mini coax cable provide with the Satellite Interface, connect “Sat
Receiver Out” on the Satellite Interface to “Satellite In” on the Dish
Network or ExpressVu HD receiver.
See Figure 3.8. See Appendix A for a complete wiring diagram.
SATELLITE IN
SAT.
ANTENNA
IN
SAT.
RECEIVER
OUT
FACTORY
USE
ONLY
HD
CTRL 1
HD
CTRL 2
COMM. OUT 1
TO SAT.
ANTENNA
DC IN
DC OUT
TO SAT
ANTENNA
BLK/RED
Satellite Interface
Figure 3.8
Primary Dish Network or
ExpressVU HD Receiver
If connecting a secondary HD or standard denition receiver, route secondary
coax cable from satellite antenna to “Satellite In” on receiver.
3.6 Connect the Satellite Interface to 110VAC Power
Plug AC Power Adapter into “DC IN” port on back of Satellite Interface. Plug the other
end into a 110V AC outlet.
Ensure that all cable connections have been made correctly before powering unit on for the
rst time.