Filter
Top Products
24
7. Satellite Interface Menu
7.1 Main Menu
After the Satellite Interface has been powered on and the antenna has acquired the satellite
signal, the status screen will the display the current satellite. Follow the steps below to ac-
cess the main menu at any time.
[BUTTON] denotes a button to be pushed on the Satellite Interface front panel, and words
in Bold represents options on the LCD screen. The *Asterisk onscreen denotes the current
selection.
Press and hold the [ENTER] button for 2 seconds.
Press [SELECT] to select Yes.
Press [ENTER] to conrm selection. You will now be in the Main Menu.
Main Menu options ow in the following order:
Satellite Setup → Sleep Menu → Diagnostics → Conguration → Exit
To Exit the Main Menu at any time, press [SELECT] until Exit is selected. Press
[ENTER] to conrm. You will return to the status screen.
7.2 Satellite Setup Menu
Automatic Mode
From the Satellite Setup menu, you may choose your satellite service provider to operate in
Automatic Mode, or you may choose to control the antenna in Manual Mode. For more in-
formation on Automatic Mode, please see the Operations Section for your Satellite Service
Provider.
Satellite Setup Menu options ow in the following order:
Sat Provider→ Manual Mode → Factory Default → Exit
Choose a Satellite Service Provider for Automatic Mode.
From the Main Menu, press [ENTER] to conrm Satellite Setup.
Press [ENTER] to conrm Sat Provider.
Satellite Interface
POWER
SELECT
ENTER
Enter User Menu?
Yes No
*
Satellite Interface
POWER
SELECT
ENTER
Satellite Setup*
Sleep Menu