28
Exit Sleep Mode
You may force the antenna into Tracking Mode at any time while the system is in Sleep
Mode.
From the Sleep Menu, press [SELECT] to select Exit Sleep Mode.
Press [ENTER] to conrm.
A conrmation message will appear. The antenna will immediately exit Sleep Mode and
enter Tracking Mode.
Set Sleep Time
While in Tracking Mode, if the antenna does not sense movement for a set amount of time,
the antenna will automatically exit Tracking Mode and Enter Sleep Mode. The default
timer is set to 7 minutes.
From the Sleep Menu, press [SELECT] 2 times to select Set Sleep Time.
Press [ENTER] to conrm.
You will enter the Set Sleep Timer menu. Sleep Timer Range is from 0000-1999, and is
measured in seconds. Note: By setting the Sleep Timer to 0000, the Dish will never
enter Sleep Mode. The Dish will constantly track the satellite whether stationary or
in-motion.
Press [SELECT] to increase selected digit by 1. Press [ENTER] to conrm digit and
move to next digit.
After 4th digit is set, press [ENTER] to conrm new time.
You will be prompted to Save Setting. Press [SELECT] to select Yes, then [ENTER] to
conrm. A conrmation screen will appear and you will return to the status screen.
Winegard does not
recommend setting sleep
timer to less than 3 minutes.
Your dish may unexpect-
edly enter sleep mode, such
as at a trafc light or stop
sign.
Satellite Interface
POWER
SELECT
ENTER
Exit Sleep Mode*
Set Sleep Time
Satellite Interface
POWER
SELECT
ENTER
Set Sleep Time*
Default Sleep
Satellite Interface
POWER
SELECT
ENTER
Set Sleep Timer
0420 seconds