Filter
Top Products
17
5. Dish Network Operation
5.1 Dish Network Overview
When connected to a Winegard Automatic Satellite System, the Winegard HD satellite
Interface is capable of receiving the following satellites automatically:
Satellite 119°W - Majority of standard programming
Satellite 110°W - Standard and HD programming
Satellite 129°W - HD programming only
•
•
•
In Automatic Mode, your Winegard automatic satellite antenna will automatically toggle
between the 3 satellites as you change channels on your Dish Network remote control. The
toggle feature will work while stationary for all models and in-motion for in-motion model
satellite antennas.
You may also operate the satellite antenna in Manual Mode. You will be able to access ad-
ditional available Dish Network satellites, including 61.5°W and 148°W. More information
on manual mode is available in Section 7.2.
Toggle - the dish
will automatically move
between satellites by
changing channels on
your remote control.
5.2 Dish Network First Time Setup
Congure Satellite Interface box for Dish Network programming
Press [Power] to power on the Satellite Interface and Satellite Antenna. The antenna will
begin it’s search for its pre-set satellite.
Access the Main Menu. Press and hold the [ENTER] button for 2 seconds.
Press [SELECT] to choose Yes.
Press [ENTER] to conrm selection. You are now in the Main Menu.
Press [ENTER] to conrm Satellite Setup.
Press [ENTER] to conrm Sat Provider.
From Service Provider menu press [SELECT] to select Dish.
Press [ENTER] to conrm.
Satellite Interface
POWER
SELECT
ENTER
Enter User Menu?
Yes No
*
Satellite Interface
POWER
SELECT
ENTER
Satellite Setup*
Enter Sleep
Satellite Interface
POWER
SELECT
ENTER
Service Provider
*DTV DISH BELL