Filter
Top Products
10 Installation
MAN0131 (Rev. 12/23/2005)
WOODS 1006 LOADER
Install Hydraulic Fittings
Use thread sealant on pipe threads. Be careful not to
use excess sealant that could enter hydraulic system.
NOTE: Some fittings in hose kit will not be used for
this installation.
1. Remove male quick coupler (C) and elbow (B)
from the PBY port (N) on the hydraulic manifold.
See Figure 8.
2. Attach tee (5) to adapter (A) and point it to the
rear. See Figure 9.
3. Attach adapter (14) and male quick coupler (3) to
the center portion tee (5).
4. Attach elbow (B) and male quick coupler (C) to
the end of tee (5). Point elbow and quick coupler
to the front.
5. Attach female quick coupler (2) to the end of the
loader valve PBY hose.
Loader Fittings
A. 315045 Adapter, 3/8 BSPTM x 3/8 NPTM
B. 313010 Elbow, 3/8 NPTM x 3/8 NPTM
C. ------- Quick coupler, male 3/8
Hose KIt Fitting
5. 66368 Tee, 3/8 NPT
3. 64300 Quick coupler, male 3/8
14. 315030 Adapter, 3/8 NPTM x 3/8 NPTM
Figure 8. 1006 Loader Hydraulic Fitting
Figure 9. Hydraulic Fitting INstallation
Backhoe Hose Connection
1. Attach hose (1) with female quick coupler (2) from
the backhoe valve OUT port to the male quick
coupler in the center of tee (5).
2. Attach hose (1) with male quick coupler (3) from
the backhoe valve to female quick coupler (2) on
the end of the loader valve PBY hose.
1. 38656 Hose, 112" x 3/8 NPTM x 3/4 ORBM
2. 64299 Quick coupler, female
3. 64300 Quick coupler, male
5. 66368 Tee, 3/8 NPT
Figure 10. Backhoe Hose Connection
CD4482-1
PRESSURE
RETURN
PBY
A
B
C
P
T
N
5
C
3
14
A
B
CD5941A-1
2
Loader Valve
PBY Hose
P
T
N
1
2
1
2
3
5
Backhoe Valve
OUT Port
Backhoe Valve
IN Port
Loader Valve
PBY Hose
CD5941A-2
Male