Filter
Top Products
Installation 11
MAN0131 (Rev. 12/23/2005)
MAHINDRA ML104 LOADER
Install Hydraulic Fittings
Use thread sealant on pipe threads. Be careful not to
use excess sealant that could enter hydraulic system.
NOTE: Some fittings in hose kit will not be used for
this installation.
1. Disconnect loader valve PBY hose from elbow
(A) in the tractor hydraulic manifold and remove
elbow (A). See Figure 11.
2. Attach adapter (6) and tee (5) to the PBY port (N)
on the tractor hydraulic manifold. Position tee to
point to the rear. See Figure 12.
3. Attach adapter (14) and male quick coupler (3) to
the center port of tee (5).
4. Attach elbow (4) and male quick coupler (3) to the
end of tee (5). Point elbow and quick coupler 45°
up and to the front.
5. Attach female quick coupler (2) and adapter (13)
to the end of the loader valve PBY hose.
Hose KIt Fitting
2. 64299 Quick coupler, female
3. 64300 Quick coupler, male 3/8
4. 66367 Elbow, 3/8 NPTM x 3/8 NPTM 90°
5. 66368 Tee, 3/8 NPT
6. 66369 Adapter, 3/8 BSTPM x 3/8 NPTF
13. 63480 Adapter, 3/8 NPTM x 9/16 JICM
14. 315030 Adapter, 3/8 NPTM x 3/8 NPTM
A. -------- Mahindra part
Figure 11. Mahindra ML104 Loader Hydraulic Fitting
Figure 12. Hydraulic Fitting Installation
Backhoe Hose Connection
1. Attach hose (1) with female quick coupler (2) from
the backhoe valve OUT port to the male quick
coupler in the center of tee (5).
2. Attach hose (1) with male quick coupler (3) from
the backhoe valve to female quick coupler (2) on
the end of the loader valve PBY hose.
1. 38656 Hose, 112" x 3/8 NPTM x 3/4 ORBM
2. 64299 Quick coupler, female
3. 64300 Quick coupler, male
5. 66368 Tee, 3/8 NPT
Figure 13. Backhoe Hose Connection
PRESSURE
RETURN
PBY
Loader Valve
PBY Hose
CD4482-3
A
P
T
N
5
3
3
14
6
4
CD5941A-3
Loader Valve
PBY Hose
2
13
P
T
N
1
2
1
2
3
5
Backhoe Valve
OUT Port
Backhoe Valve
IN Port
Loader Valve
PBY Hose
CD5941A-2
Male