Filter
Top Products
10 Installation
PN-59756 (Rev. 4/9/01)
SUB-FRAME INSTALLATION Cont’d
Sub-Frame Fit-Up
1. Insert sub-frame (1) into rear mounting bracket
cradle (2 & 3).
2. Secure with clevis pins (17) and safety pins (19).
3. Pivot sub-frame up and secure to front mount (6)
with bent pin (7) and Klik pin (18).
4. Remove sub-frame from tractor.
5. Tighten 12mm hardware to 50 lbs.-ft.
IMPORTANT
■ DO NOT install the 3-point hitch top link on
this subframe mounting kit. No top link
bracket should be used on this backhoe.
Figure 10 Sub-frame Fit-up (typical)
CD4891
1. Sub-frame
2. Right rear mount bracket
3. Left rear mount bracket
6. Front mount
7. Bent pin, .75 x 11
17. Clevis pin, .75 x 2.76
18. 1/4 x 1-3/4 Klik pin
19. 1/8 Safety pin
17
19
17
19
1
2
3
6
18
7