Filter
Top Products
6 Installation
PN-59756 (Rev. 4/9/01)
SUB-FRAME INSTALLATION Cont’d
Install Rear Hanger Brackets
1. Install new right and left rear hanger brackets (1,
2), using eight 10mm bolts (20) and hardened flat
washers (22).
2. Install six 10mm x 1.5P x 80mm (21) and washers
(22) to secure rear hangers.
3. Install cap screws (25), washers (29), and nuts
(28) through crossmembers welded to rear hanger
brackets.
4. Torque 10mm cap screws to 29 lbs-ft.
5. Torque 12mm cap screws to 50 lbs-ft.
1. 1000578 Right rear hanger bracket
2. 1000579 Left rear hanger bracket
20. 307301 M10–1.5P x 30mm Cap screw
21. 58514 M10–1.5P x 80mm Cap screw
22. 44546 3/8 Extra thick flat washer
25. 58515 M12–1.75P x 45mm Cap screw
28. 307813 M12 x 1.75 Hex nut
29. 57811 1/2 Extra thick flat washer
Figure 2 Rear Hanger Bracket Assembly
Figure 3 Rear Hanger Brackets Installed
2
22
21
29
22
20
28
1
29
25