Filter
Top Products
12 Installation
PN-59756 (Rev. 4/9/01)
SUB-FRAME INSTALLATION Cont’d
Mount Bracket to Pump Kit
NOTE: For complete information on pump kit installa-
tion, consult the Woods BH6500/7500 backhoe oper-
ators manual #37541.
The pump mounting bracket is designed to slip over
the tractor drawbar and prevent the pump from rotat-
ing.
1. Trim the bracket flush with the bottom of the trac-
tor drawbar if necessary.
2. Attach pump mounting bracket #59760 (2) to
pump assembly as shown in Figure 12.
3. Secure with cap screw (5) and lock nut (3) as
shown.
4. Torque cap screw to 85 lbs.-ft.
1. Pump
2. Pump mounting bracket
3. 1/2 NC Lock nut
4. Tractor drawbar
5. 1/2 NC x 1-1/2” Cap screw
6. Tractor PTO shaft
Figure 12 Pump Bracket Assembly
(Typical)