Filter
Top Products
Operation
26 975-0210-01-01
Indicators and Controls
The RC/GS and RC7 feature LEDs, a display screen, and
buttons for viewing operating status.
Status LEDs
Four indicator lights (LEDs) light up or flash during
operation to indicate the system’s status. When the inverter is
powered on, all LEDs flash as the unit goes through a self-
test. After the self-test completes, the LEDs indicate the
current state of the inverter and charger. Use these LEDs
along with the screen to view complete system status.
Figure 4-1
Status LEDs
Inverter
Charge
Batt. Full
Error
Green
Yellow
Yellow
Red
RC-GS_manual.book Page 26 Friday, May 20, 2005 4:57 PM