Yamaha DVD-C900 DVD Player User Manual


 
44
Initial settings (on the SET UP menu)
1 Turn on this unit and the TV monitor, and load discs.
2 Press SET UP when this unit is stopped.
* The SET UP menu appears on the monitor screen.
3 Press or to select the preferred SET UP
group.
4 Press or to select the preferred item, and then
press SELECT.
*
The display on the monitor screen changes to the mode
for setting change.
*
The current selection is indicated by “
*
” at the head.
5 Press or to change the selection, and then
press SELECT.
* Some items require additional steps. (See the
respective pages.)
6 When the setting change is finished, press RETURN
(or ) once or more to return to the previous
display.
7 Repeat steps 3 to 6 for other items.
To return to the previous display
Press RETURN or .
To clear the SET UP menu
Press SET UP.
To restore the factory default settings for all items
While holding CANCEL on the remote controller
pressed, press and hold on the front panel for more
than 5 seconds.
For your reference:
The numeric buttons can also be used for a setting change
instead of
or . In this case, pressing SELECT is not
necessary.
Note
If the SET UP menu is displayed during playback, you may not
be able to change settings on some items. To change them,
stop this unit.
12345
6
+10
7890
A
-
BS
/
FCANCEL
ANGLE
SELECT
TITLE AUDIO
MENU
SUBTITLE
SET UP
ON SCREEN
OFF
/
ON
MULTI SPEED
RETURN
TITLE
/
INDEX
REPEAT
DISC SKIP
PROG
RANDOM
DISC MODE
TIME
OPEN
/
CLOSE
STOP
STILL
/
PAUSE
SKIP/SEARCH
PLAY
Common procedure for setting change
2
3
6
6
4, 5