Filter
Top Products
STB-1001S2 User’s Guide
21
CHAPTER 2
The Menu System
This chapter discusses the STB’s menus. These menus are displayed on the screen of the
television connected to the STB, and operated using the STB’s remote control.
• Use the Basic Setup menus to make basic changes to the STB’s configuration (such as
activating Daylight Saving Time or selecting the video mode).
• Use the Advanced Setup menus to make advanced changes to the STB’s configuration
(such as setting the STB’s homepage or changing its IP address).
2.1 Navigating the Menus
• Each menu has two columns. On the left, you can select the setup menu you want to see,
and on the right you can change the menu’s settings.
• Use the and navigator keys on the remote control to move between the two columns.
• Use the and navigator keys on the remote control to highlight the menu or setting you
want.
• The currently-highlighted item is colored orange.
• Use the OK key on the remote control to select the highlighted object.
• When you go to a new menu, the top item in the right-hand column is automatically
highlighted. To move to the left-hand column, press the key.
• Highlight and select the Save button in each menu to store the changes you configure.
2.2 The Basic Setup Menus
Use the Basic Setup menus to configure how the STB shows media, to turn Daylight Saving
Time on or off, or to reset the STB. Use the remote control to navigate the menu system.
2.2.1 Accessing and Exiting the Basic Setup Menus
Take the following steps to access the Basic Setup menus.
1 Make sure the network is connected.
If you are not sure whether the network is connected or not, press the HOME key on the
remote control. If the Home menu displays normally, the STB is properly connected.