Filter
Top Products
Chapter 2 The Menu System
STB-1001S2 User’s Guide
26
1 Ensure that the STB is set up and working correctly, as shown in the Quick Start Guide.
2 Press Menu to enter the menu system.
3 Press the blue key on the remote controller three times. The Login menu displays.
Figure 10 The Login Menu
4 Enter the password. The default password is “123456”.
5 Press the navigator key to highlight the login button. Press the OK key.
The Advanced Setup: Information menu displays when you are successfully logged in.
2.3.2 The Advanced Setup: Information Menu
Use this menu to see information about the STB’s current network and configuration settings.
Select Information from the column on the left of the screen. The following menu displays.
Figure 11 The Information Menu
The following table describes the labels in this menu.
Table 6 The Information Menu
LABEL DESCRIPTION
Date This shows the current date configured on the STB.
CPU This shows the Central Processing Unit’s product code.
Flash This shows the quantity of available flash (non-volatile) memory.
Memory This shows the quantity of available run-time memory.