Filter
Top Products
Chapter 2 The Menu System
STB-1001S2 User’s Guide
29
2.3.3.3 Network: PPPoE
Select PPPoE in the Network menu. The following menu displays.
Figure 14 The Network: PPPoE Menu
The following table describes the labels in this menu that were not already described in table 7.
2.3.4 The Advanced Setup: Firmware Upgrade Menu
Use this menu to get new firmware from the autoconfiguration server. You must be connected
to the network and have a valid autoconfiguration server address configured in the Advanced
Setup: Network menu’s ACS Server field (see Section 2.3.3 on page 27).
Select Firmware Upgrade from the column on the left of the screen. The following menu
displays.
Figure 15 The Firmware Upgrade Menu
Table 9 The Network: PPPoE Menu
LABEL DESCRIPTION
Mode Select PPPoE to use a Point-to-Point Protocol over Ethernet
service.
User Name Enter the username for your PPPoE account.
Password Enter the password for your PPPoE account.