ZyXEL Communications STB-1001S2 Satellite TV System User Manual


 
Appendix A Setting up Your Computer’s IP Address
STB-1001S2 User’s Guide
57
Figure 41 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
Type your IP address in the IP Address box.
Type your subnet mask in the Subnet mask box.
Type the IP address of your STB in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your STB and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.