Filter
Top Products
Chapter 4 Product Specifications
STB-1001S2 User’s Guide
38
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the STB with the connection cables.
5 Align the holes on the back of the STB with the screws on the wall. Hang the STB on the
screws.
Figure 17 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting.
All measurements are in millimeters (mm).
Figure 18 Masonry Plug and M4 Tap Screw