A SERVICE OF

logo

3-62 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.39 Displayed and setting items in the [OP-Panel] window
Table 3.40 Button in the [OP-Panel] window
(1) Menu operation
[System] [Other Boards] [OP-Panel]
(2) GUI operation
1 Click the [Status Clear] button.
A confirmation dialog box opens for confirmation to clear the error status of
the OP-Panel board.
2 Click the [OK] button in the dialog box to clear the error status of the OP-
Panel board.
The error status is cleared, and use of the OP-Panel board is attempted at the
next reboot.
To not clear the error status of the OP-Panel board, click the [Cancel] button
in the dialog box.
Item Description
Board Information
Status OP-Panel board status:
OK: Operating normally
Not present: Not installed
Degraded: Component failure (The faulty component can be
isolated to continue operation.)
Failed: Failure
Power Status OP-Panel board power status:
On: Powered on
Standby: Standby mode
Part Number OP-Panel board part number
Serial Number OP-Panel board serial number
Location LED Location LED status
The three light statuses are as follows:
On: Currently lit
Off: Currently not lit
Blink: Currently blinking
The LED can be turned on, turned off, or set to blink by clicking a
radio button.
Button Description
Status Clear Clears the error status of the OP-Panel board and attempts to use
the OP-Panel board at the next reboot.