A SERVICE OF

logo

8-138 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
Also, inquiries are sent to an NTP server at the following times:
z When the command is entered
z When the device is turned on and started
z When the device is restarted by the reload command
(1) Synopsis
Specifies the interval of inquiries to an NTP server
Resets the interval of inquiries to an NTP server to the default value
(2) Options
z <interval>
Specifies the interval of inquiries to an NTP server.
Specify the interval in a range of 1 to 24 hours. The default setting is one hour.
z <timeout>
Specifies the timeout time of an inquiry to the server.
Specify a time in a range of 1 to 15 seconds. The default setting is 3 seconds.
(3) Command mode
Global
(4) See also
ntp server
show ntp
(5) Example
Sets the interval of inquiries to an NTP server
ntp status <interval> <timeout>
no ntp status
Switch(config)# ntp status 12 5
Switch(config)#