A SERVICE OF

logo

C122-E003-02EN 8-169
GSWB
8.3 Operation Commands
8.3.2.4 reload
This command restarts the whole unit.
This command cannot be executed during execution of the change, reload, or install
command.
(1) Synopsis
Restarts the whole unit after diagnostics processing if specified
(2) Options
z [non-idiag | idiag] (optional)
If non-idiag is specified, the device will be restarted without diagnosis. If idiag is
specified, the device will be restarted after all diagnostic processing is performed.
By default, the device will be restarted without diagnosis.
(3) Command mode
enabled exec
(4) See also
change
install
(5) Examples
Restarts without diagnostics
Restarts after diagnostics processing is completed
reload [non-idiag | idiag]
Switch# reload
Are you sure? [y/n]:y
Now perform...
Switch# reload idiag
Are you sure? [y/n]:y
Now perform...