C122-E003-02EN 3-89
MMB
3.3 Partition Menu
3.3.4 Console Redirection Switch window
The [Console Redirection Switch] window can be used to connect serial output from a
partition to the COM port of the home IO_Unit or redirect it to the MMB.
Figure 3.35 [Console Redirection Switch] window
Table 3.58 Displayed and setting items in the [Console Redirection Switch]
window
Item Description
# Partition identification number.
Partition Name Name assigned to a partition.
Status Partition status:
• OK: Operating normally
• Degraded: Component failure (The faulty component can be
isolated to continue operation.)
• Warning: Warning status (A problem will possibly occur.)
• Failed: Failure
Power Status Partition power status:
• On: Powered on
• Standby: Standby mode
Connect to For serial output from the OS, select either a connection to the
IO_Unit COM port or redirection to a remote client via the MMB:
• COM: Output to the COM port
• MMB: Redirected to a remote client via the MMB
The default setting is [COM].
