3-78 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.48 Displayed and setting items in the [Power Control] window
Item Description
# Partition identification number.
This window displays only the partitions with a registered SB or
IO_Unit.
Partition Name Name assigned to a partition.
Note: To make identification easier, specify the same name as the
host name defined in the OS.
Status Partition status:
• OK: Operating normally
• Degraded: Component failure (The faulty component can be
isolated to continue operation.)
• Warning: Warning status (A problem will possibly occur.)
• Failed: Failure
Power Status Partition power status:
• On: Powered on
• Standby: Standby mode
System Progress Indicates the current status of the partition.
• Power Off: The partition is in the power-off state.
• Power On In Progress: The partition is executing power-on
processing.
• Reset: The partition is being reset.
• POST XXXXh enter: The process identified by POST Code =
XXXXh has started.
• Boot: Booting is in progress.
• OS Running: The OS is running.
• OS Shutdown: The OS is shutting down.
• Panic: The partition is in panic state.
• Power Off In Progress: The partition is executing power-off
processing.
• Check Stop: The partition is stopped.
• Initiate soft-shutdown: The count-down for forced power-off
has started.
