8-140 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(4) See also
logging level
show logging
(5) Example
• Enables message log collection
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.2.22.2 logging level
This command specifies the collection level of the message log (mlog).
mlog, tlog, llog cannot be saved during execution of this command.
(1) Synopsis
• Specifies the recording level of the message log
Switch(config)# logging on
Switch(config)#
logging level {debug | info | notice | warning | error | crit | alert | emerg}
