fi-4530C Image Scanner Getting Started AP-3
■ Temporary error
The following shows the procedure for releasing of each
temporary error.
• "U1" error
Remove jammed documents.
Confirm that the documents meet the paper condi-
tions for scanning.
Refer to fi-4530C Operator’s Guide "6.2 Document
Quality" on the Setup CD-ROM.
• "U2" error
Remove jammed documents.
Confirm that the documents meet the paper condi-
tions for scanning.
Refer to fi-4530C Operator’s Guide "6.2 Document
Quality" on the Setup CD-ROM.
• "U6" error
This error may occur only when the Imprinter
option is installed on your scanner.
Open the ink cover and confirm if the print car-
tridge is firmly attached.
■ Device alarm (Permanent error)
When you encounter any alarm, turn off and on the scan-
ner. If the alarm is still displayed on the Function No. dis-
play, contact the store where you purchased the scanner or
an authorized FUJITSU scanner service provider.
Indication Meaning
U1 A paper feed error occurred.
U2 A double feed error occurred.
U6 The print cartridge is not set.
Indication Meaning
E2 A trouble in the optical system (front).
E3 A trouble in the optical system (back).
E4 The motor fuse has blown out.
E6 A trouble in the operator panel.
E7 A trouble occurred in the EEPROM.
E8 The SCSI interface fuse has blown
out.
E9 An error in the image memory.
Ec An alarm in the memory.
Ed A trouble in the SCSI interface con-
troller.
EF A trouble in the Background switching
mechanism.
