fi-4530C Image Scanner Getting Started AP-5
Appendix3 REPLACING CONSUMABLES
■ Consumables and Replacement
Cycle
The following table shows the specifications of
consumables and guidelines for the replacement
cycle.
For purchase of consumables,
contact the store where
you purchased the scanner or an authorized FUJITSU
scanner service provider.
The replacement cycles above are rough guidelines for
the case of using A4/Letter woodfree or wood contain-
ing paper 64 g/m
2
(17 lb). This cycle varies according to
the type of the used paper and how frequently the scan-
ner is used and cleaned.
Folowing illustration shows the locations of the parts to
be replaced. Refer to "Chapter 4 Replacing Consum-
ables" fi-4530C Operator’s Guide on the Setup
CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller
The glass of the inside of the
ADF becomes hot during opera-
tion.
When you clean the inside of the
scanner, turn off the power and
unplug the AC adapter from the
outlet and wait for at least three
minutes.
Do not turn off the scanner when
you clean the Feed rollers or
Eject rollers.
Description Parts No.
Standard
Replacement
Cycle
Pad ASSY PA03334-
0002
After 100,000 scans
or one year
Pick roller PA03334-
0001
After 200,000 sheets
or one year
ATTENTION
Use only the specified consumables.
Do not use other consumables.
To remove
To attach
Pad ASSY
Sheet guide
Pick rolle
