4-3
Removing the User Interface
1. Unplug cooktop or disconnect power.
2. Remove the cooktop glass from the cooktop
(see page 4-2 for the procedure).
4. Remove the two edge connectors from
the top of the User Interface.
3. Gently pull up on edges of User Interface
board to release holder tabs, raise the user
interface, and remove the board from the
tab locations, see gure 1.
5. When replacing the User Interface, be
sure to engage the holder tabs into the
tab location positions, see gure 1.
Holder tabs are held in place by the
pressure of the glass top and isolated by
the springs surrounding each tab, see
gure 2.
User Interface
User Interface
Connectors
User Interface
(back side)
Holder Tabs
Tab Locations
Figure 1
Figure 2
Holder Tab
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
